In connection function, inserting and pulling force is an important mechanical property. Inserting and pulling force is divided into inserting and pulling force and pulling force (pulling and pulling force is also called separation force), and the two requirements are different. Another important mechanical property is the mechanical life of din 41612 type h connectors. It takes one insert and one pull out as a cycle, and takes whether the connector can normally complete its connection function (such as touch resistance value) after the specified insert and pull out cycle as a basis for judgment.

In connection function, inserting and pulling force is an important mechanical property. Inserting and pulling force is divided into inserting and pulling force and pulling force (pulling and pulling force is also called separation force), and the two requirements are different. In the relevant standards, there are greater insertion forces and minimum separation forces specified, which indicates that from the point of view of use, the insertion force is small (and then the insertion force is low)LIF and no insertion force ZIF structure), if the separation force is too small, it will affect the reliability of the contact.

Another important mechanical property is the mechanical life of din 41612 type h connectors. In fact, the mechanical life is a durability indicator, in the national standard GB it is referred to as mechanical operation in 5095. It takes one insert and one pull out as a cycle, and takes whether the connector can normally complete its connection function (such as touch resistance value) after the specified insert and pull out cycle as a basis for judgment.

The insertion force and mechanical life of din 41612 type h connectors are related to the coating quality (coefficient of sliding friction) of the contact component construction (positive pressure dimensions) and the dimensional accuracy (alignment) of the contact components.

2. Electrical performance mainly includes circuit resistance, insulation resistance, current and electrical strength

Circuit resistance: A high-quality electrical connector should have a low and stable circuit resistance. Circuit resistance ranges from a few milliohm to tens of milliohm.

Insulation resistance: A measure of the insulation performance between the contact of an electrical connector and the contact and the housing, ranging from hundreds of megohm to 1000 megohm.

din 41612 type h connectors https://www.kujunconnector.com/TYPE-H-Connectors